Shop
-
Dental Lab Lithium Disilicate Fitted Bridge IPS eMax CAD
Highly aesthetic IPS e.max CAD a lithium disilicate glass-ceramic ideal for up to 3 units bridge
- High-strength lithium disilicate glass-ceramic (LS2) featuring a flexural strength up to 530 MPa
- Excellent aesthetics and optional customisation
- MO, MT, LT and HT translucency levels
- Full VITA shades
- SEND IMPRESSIONS – download FREE post lable below
- OR SCAN – see instructions below:
Please read before purchase: This is a custome made dental prosthetic device to be perscribed by a dentist for their patient. The fabrication process may require a wax set up for try-in stage to ensure perfect fit and esthetic looks meet the requirement. Therefore, this product can only be purchsed by GDC registered dentist or dental practice. Read more in the Store Policies tab below.
Login to see prices -
Virtual CAD bite Registration Silicon Material
Virtual CADbite registration material offers scannable properties suitable for the optical recording of data when fabricating restorations with CAD/CAM systems like CEREC. As an addition silicone, Virtual CADbite can also be applied in conventional bite registration techniques alongside indirect restorative procedures.This material is characterized by its non-slump consistency, rapid setting time, and notable dimensional stability. Additionally, it ensures excellent detail reproduction and reaches a final hardness of 32 Shore D.Login to see prices -
Dent Spa Case Ultrasonic Denture Cleaning Box
Denture box with ultrasonic vibrating action for removable appliance cleaning.
Insert 2 ‘AAA’ batteries (not included) into the battery compartment located underneath the unit.
Open the unit by pressing on the front clip inwards and upwards.
Lightly brush your dental appliance under running water.
Place your dental appliance/s into Dent-Spa and fill with lukewarm water just below just below the lip of the unit (never use boiling water)
Add 1 NitrAdine tablet (samples inc) press the on/off switch to activate. Unit will automatically switch off after 7 minutes. TABLETS NOT TO BE TAKEN ORALLY.
Leave dental appliance/s in Dent-Spa for at least 15 minutes when used with the NitrAdine tablets, then remove appliance/s and rinse under water before placing them back in the mouth.
For best results use NitrAdine tablets at least twice a week to leave your appliance fresh, clean and disinfected against harmful bacteria. If you have symptoms of dental thrush use tablets daily for two weeks to eliminate the bacteria build-up.
Empty Dent-Spa after use, wipe clean. DO NOT submerse or rinse under running water as this will damage the unit.Login to see prices -
TiN Coating Wilson Carbide Bur Trimming Metal 5060350
Wilson Precision Tools Tungsten Carbide Bur For Low Speed Metal Trimming
Login to see prices -
Wilson Carbide Bur Trimming Acrylic Plaster Metal
Wilson Precision Tools Tungsten Carbide Bur For Low Speed Trimming Acrylic, Plaster or Metal
Login to see prices -
Wilson Carbide Bur Metal Trimming 5001705
Wilson Precision Tools Tungsten Carbide Bur For Low Speed Metal Trimming
Login to see prices -
Ivoclar IPS eMax CAD Lithium Disilicate Dental Milling Block
Highly aesthetic IPS e.max CAD a lithium disilicate glass-ceramic blocks ideal for Veneers, inlays / onlays, partial crowns / full crowns.
- High-strength lithium disilicate glass-ceramic (LS2) featuring a flexural strength up to 530 MPa
- Excellent aesthetics and optional customisation
- MO, MT, LT and HT translucency levels
- Full VITA shades
Login to see prices -
DuraCetal Frame Acrylic Partial Denture
DuraCetal Frame Removable Partial Acrylic Denture. Myerson’s Duracetal is a pure, highly crystalline acetal copolymer resin. DuraCetal RPDs are metal-free material, ideal lightweight alternative to partial Cobalt Chrome denture frameworks.
DURACETAL RPDs FRAME HIGH-IMPACT ACRYLIC DENTURE
ESTABLISHED MATERIAL NOW DESIGNED FOR THE DIGITAL WORKFLOW.
Available in 5 VITA shades: A1, A2, A3.5, B1 & G2 (bleach shade) and the new Pink 1 shade
Please read before you purchase: This is a custome made dental prosthetic device to be perscribed by a dentist for their patient. The fabrication process may require a wax set up for try-in stage to ensure perfect fit and esthetic looks meet the requirement. Therefore, this product can only be purchsed by GDC registered dentist or dental practice. Read more in the Store Policies tab below.
Login to see prices -
IPS Ivocolor – Glaze Powder/Paste
IPS Ivocolor Glaze Paste is a thixotropic glaze paste for a high degree of gloss in only one firing cycle. The glaze is available with or without fluorescence and is compatible with all IPS ceramics.
Login to see prices -
eMax Lithium Disilicate Fitted Crown
Highly aesthetic IPS e.max CAD a lithium disilicate glass-ceramic ideal for Veneers, inlays / onlays, partial crowns / full crowns
- High-strength lithium disilicate glass-ceramic (LS2) featuring a flexural strength up to 530 MPa
- Excellent aesthetics and optional customisation
- MO, MT, LT and HT translucency levels
- Full VITA shades
- SEND IMPRESSIONS – download FREE post lable below
- OR SCAN – see instructions below:
Please read before purchase: This is a custome made dental prosthetic device to be perscribed by a dentist for their patient. The fabrication process may require a wax set up for try-in stage to ensure perfect fit and esthetic looks meet the requirement. Therefore, this product can only be purchsed by GDC registered dentist or dental practice. Read more in the Store Policies tab below.
Login to see prices -
DuraCetal Removable Partial Denture Framework
DURACETAL RPDs FRAME
ESTABLISHED MATERIAL NOW DESIGNED FOR THE DIGITAL WORKFLOW.
Available in 5 VITA shades: A1, A2, A3.5, B1 & G2 (bleach shade) and the new Pink 1 shade
Login to see prices
A lightweight alternative to metal framework