Shop
-
Dental Lab Lithium Disilicate Fitted Bridge IPS eMax CAD
Highly aesthetic IPS e.max CAD a lithium disilicate glass-ceramic ideal for up to 3 units bridge
- High-strength lithium disilicate glass-ceramic (LS2) featuring a flexural strength up to 530 MPa
- Excellent aesthetics and optional customisation
- MO, MT, LT and HT translucency levels
- Full VITA shades
- SEND IMPRESSIONS – download FREE post lable below
- OR SCAN – see instructions below:
Please read before purchase: This is a custome made dental prosthetic device to be perscribed by a dentist for their patient. The fabrication process may require a wax set up for try-in stage to ensure perfect fit and esthetic looks meet the requirement. Therefore, this product can only be purchsed by GDC registered dentist or dental practice. Read more in the Store Policies tab below.
Login to see prices -
Virtual CAD bite Registration Silicon Material
Virtual CADbite registration material offers scannable properties suitable for the optical recording of data when fabricating restorations with CAD/CAM systems like CEREC. As an addition silicone, Virtual CADbite can also be applied in conventional bite registration techniques alongside indirect restorative procedures.This material is characterized by its non-slump consistency, rapid setting time, and notable dimensional stability. Additionally, it ensures excellent detail reproduction and reaches a final hardness of 32 Shore D.Login to see prices -
Dent Spa Case Ultrasonic Denture Cleaning Box
Denture box with ultrasonic vibrating action for removable appliance cleaning.
Insert 2 ‘AAA’ batteries (not included) into the battery compartment located underneath the unit.
Open the unit by pressing on the front clip inwards and upwards.
Lightly brush your dental appliance under running water.
Place your dental appliance/s into Dent-Spa and fill with lukewarm water just below just below the lip of the unit (never use boiling water)
Add 1 NitrAdine tablet (samples inc) press the on/off switch to activate. Unit will automatically switch off after 7 minutes. TABLETS NOT TO BE TAKEN ORALLY.
Leave dental appliance/s in Dent-Spa for at least 15 minutes when used with the NitrAdine tablets, then remove appliance/s and rinse under water before placing them back in the mouth.
For best results use NitrAdine tablets at least twice a week to leave your appliance fresh, clean and disinfected against harmful bacteria. If you have symptoms of dental thrush use tablets daily for two weeks to eliminate the bacteria build-up.
Empty Dent-Spa after use, wipe clean. DO NOT submerse or rinse under running water as this will damage the unit.Login to see prices -
VITA Vionic Bond Bonding Kit
Bonding solution for fixing denture teeth in VITA VIONIC Basis.
Best solution for:
- digital VITA VIONIC dentures
Login to see prices -
VITA Vionic Dent Disc multiColor PMMA Milling Disc
VITA VIONIC DENT DISC multiColor is open system that can be used flexibly for full and partial dentures.
Resistant to abrasion and durable
Simple to process, easy to polish
Integrated shade gradient with Perfect Match to the VITA shade standardPhysical data:
Flexural strength (3-point bending test) approx. 80 MPa; modulus of elasticity approx. 2800 MPa.Composition in %:
Polymethyl methacrylate copolymer 84-86; silicon dioxide 14-15; pigments < 1.Pack contains one piece
Ø 98.4 x h 20 mm
Login to see prices -
Ivoclar IPS eMax CAD Lithium Disilicate Dental Milling Block
Highly aesthetic IPS e.max CAD a lithium disilicate glass-ceramic blocks ideal for Veneers, inlays / onlays, partial crowns / full crowns.
- High-strength lithium disilicate glass-ceramic (LS2) featuring a flexural strength up to 530 MPa
- Excellent aesthetics and optional customisation
- MO, MT, LT and HT translucency levels
- Full VITA shades
Login to see prices -
Coltene Brilliant Crios Composite Milling Block
- Composite Micro-Ceramic Milling Block
- For Crown/Inlay/Onlay/Veneer
- Permanent restoration
- Shades A1, A2, A3, A3.5, B1, B2, B3, C2 and BL
- Two translucencies, HT and LT
- Highly aesthetic for anterior and posterior restorations
- 250Mpa in flexual strenght
- Single units only
Login to see prices -
Digital Dentures Course for Beginners
Learn how to get started successfully with digital dentures in just three steps!
Duration: 45 minutes
Price: The course is free of charge!
Login to see prices -
Coltene Brilliant Crios Milled Composite Crown
Coltene BRILLIANT Crios is a reinforced, submicron hybrid composite. Highly aesthetic and easily polished. Brilliant Crios is available in 9 aesthetic shades and two translucencies, HT and LT. Shades A1, A2, A3, A3.5, B1, B2, B3, C2 and BL.
- Milled and Fitted
- For Crown/Inlay/Onlay/Veneer
- Permanent restoration
- Shades A1, A2, A3, A3.5, B1, B2, B3, C2 and BL
- Two translucencies, HT and LT
- Highly aesthetic for anterior and posterior restorations
- 250Mpa in flexual strenght
- Single units only
- Lab to chair service – 7 days
Login to see prices -
IPS Ivocolor – Glaze Powder/Paste
IPS Ivocolor Glaze Paste is a thixotropic glaze paste for a high degree of gloss in only one firing cycle. The glaze is available with or without fluorescence and is compatible with all IPS ceramics.
Login to see prices -
eMax Lithium Disilicate Fitted Crown
Highly aesthetic IPS e.max CAD a lithium disilicate glass-ceramic ideal for Veneers, inlays / onlays, partial crowns / full crowns
- High-strength lithium disilicate glass-ceramic (LS2) featuring a flexural strength up to 530 MPa
- Excellent aesthetics and optional customisation
- MO, MT, LT and HT translucency levels
- Full VITA shades
- SEND IMPRESSIONS – download FREE post lable below
- OR SCAN – see instructions below:
Please read before purchase: This is a custome made dental prosthetic device to be perscribed by a dentist for their patient. The fabrication process may require a wax set up for try-in stage to ensure perfect fit and esthetic looks meet the requirement. Therefore, this product can only be purchsed by GDC registered dentist or dental practice. Read more in the Store Policies tab below.
Login to see prices
