3M Oral Care
-
Dental Laboratory Zirconia Fitted Bridge ArgenZ HT+ ML
ArgenZ HT+ ML Zirconia is available in 1-14 units. Made with ArgenZ™ High Tranclucency Plus Multilayer zirconia material, it offers high precision, blending technology, shade accuracy, 45% translucency and increased strength over other HT zirconia. It can be used for single units to full arches for frames or full contours.
- From Scan or Impression
- Precisely CAD, milled and glazed, delivered ready to fitting in the patient’s mouth.
ArgenZ™ HT+ML Zirconia: Do you need to choose between strength and aesthetics?
EC Declaration Of Conformity: Quality and Regulatory Assurance
Please read before purchase: This is a custome made dental prosthetic device to be perscribed by a dentist for their patient. The fabrication process may require a wax set up for try-in stage to ensure perfect fit and esthetic looks meet the requirement. Therefore, this product can only be purchsed by GDC registered dentist or dental practice. Read more in the Store Policies tab below.
Login to see prices -
Dental Laboratory Zirconia Fitted Bridge ArgenZ HT+
ArgenZ HT+ Zirconia (High Translucent-Plus) offers 45% more translucency and increased strength over other HT zirconia. Precisely CAD, milled and glazed, ready to fit in the patient’s mouth.
- Dental Lab to Dental Chair Service in 7 Days
- From Scan or Impression
- Suitable for full crowns and up to 14 unit full-arch, as well as veneers, inlays and onlays
- 45% translucency
- 1250 MPa flexural strength
- 16 VITA shades, White & Bleach
- Unmatched strength and shade accuracy
- 5 Year Guarantee against fracture damage
ArgenZ™ HT+ Zirconia: Do you need to choose between strength and aesthetics?
ArgenZ™ HT+: Preparation Guide
EC Declaration Of Conformity: Quality and Regulatory Assurance
Please read before purchase: This is a custom made dental prosthetic device to be prescribed by a dentist for their patient. The fabrication process may require a wax set up for try-in stage to ensure perfect fit and aesthetic looks meet the requirement. Therefore, this product can only be purchased by GDC registered dentist or dental practice. Read more in the Store Policies tab below.
Login to see prices -
Dental Lab Zirconia Maryland Bridge ArgenZ HT+ ML
Full ceramic Pontic and Wing
Made with High Tranclucency Plus Multilayer zirconia material, it offers high precision, blending technology, shade accuracy, 45% translucency and increased strength over other HT zirconia.
- Precisely CAD, milled and glazed, ready to fit in the patient’s mouth.
- Suitable for incisor, canine and premolar teeth restorations
- 45% translucency
- 1250 MPa flexural strength
- Unmatched strength and shade accuracy
ArgenZ™ HT+ML Zirconia: Do you need to choose between strength and aesthetics?
EC Declaration Of Conformity: Quality and Regulatory Assurance
Please read before you purchase: This is a custome made dental prosthetic device to be perscribed by a dentist for their patient. The fabrication process may require a wax set up for try-in stage to ensure perfect fit and esthetic looks meet the requirement. Therefore, this product can only be purchsed by GDC registered dentist or dental practice. Read more in the Store Policies tab below.
Login to see prices -
Dental Lab Zirconia Fitted Bridge ArgenZ STML
ArgenZ ST ML Zirconia is a Super Translucent Multilayer Milled Zirconia Dental Bridge for beautiful aesthetics most closely mimicking the natural dentin of the tooth. Precisely CAD, milled and glazed, ready to fit in the patient’s mouth.
- Dental Lab to Dental Chair Service in 7 Days
- From Scan or Impression
- Suitable for up-to 3 unit bridges anywhere in the mouth
- 50% translucency
- 850MPa flexural strength
- A stronger alternative to IPS e.max
- 16 VITA Classical and 3 Bleach shades
- 5 Year Guarantee against fracture damage
ArgenZ ST ML Zirconia is a great alternative to lithium disilicate offering the highest translucency with optimum strength featuring the natural dentin of the tooth. It can be used for up to three-unit bridges anywhere in the mouth, including pre-molars. ArgenZ™ material is manufactured in the USA, isostatically pressed and CE compliant.
ArgenZ™ ST ML Zirconia: Do you need to choose between strength and aesthetics?
EC Declaration Of Conformity: Quality and Regulatory Assurance
Safety Data Sheet: M00104_ArgenZ_Anterior_STML_Discs
Please read before purchase: This is a custome made dental prosthetic device to be perscribed by a dentist for their patient. The fabrication process may require a wax set up for try-in stage to ensure perfect fit and esthetic looks meet the requirement. Therefore, this product can only be purchsed by GDC registered dentist or dental practice. Read more in the Store Policies tab below.
Login to see prices -
3M 8822 FFP2 Valved Face Mask Pack of 10
FFP2 (Filtering Face Piece – Class 2) provides protection against medium level fine dusts and oil or water based mists, typically found during power sanding, grinding, drilling and cutting paints, varnish, cement, wood and steel.
3M™ Cool Flow™ Valve reduces heat build-up inside the respirator giving cooler and more comfortable wear.
Pack of 10
Login to see prices -
Dent Spa Case Ultrasonic Denture Cleaning Box
Denture box with ultrasonic vibrating action for removable appliance cleaning.
Insert 2 ‘AAA’ batteries (not included) into the battery compartment located underneath the unit.
Open the unit by pressing on the front clip inwards and upwards.
Lightly brush your dental appliance under running water.
Place your dental appliance/s into Dent-Spa and fill with lukewarm water just below just below the lip of the unit (never use boiling water)
Add 1 NitrAdine tablet (samples inc) press the on/off switch to activate. Unit will automatically switch off after 7 minutes. TABLETS NOT TO BE TAKEN ORALLY.
Leave dental appliance/s in Dent-Spa for at least 15 minutes when used with the NitrAdine tablets, then remove appliance/s and rinse under water before placing them back in the mouth.
For best results use NitrAdine tablets at least twice a week to leave your appliance fresh, clean and disinfected against harmful bacteria. If you have symptoms of dental thrush use tablets daily for two weeks to eliminate the bacteria build-up.
Empty Dent-Spa after use, wipe clean. DO NOT submerse or rinse under running water as this will damage the unit.Login to see prices -
ArgenZ HT+ Zirconia Fitted Crown Inlay Onlay
ArgenZ HT+ Zirconia (High Translucent-Plus) offers 45% more translucency and increased strength over other HT zirconia. Precisely CAD, milled and glazed, ready to fit in the patient’s mouth.
- Dental Lab to Dental Chair Service in 7 Days
- From Scan or Impression
- Suitable for full crowns and up to 14 unit full-arch, as well as veneers, inlays and onlays
- 45% translucency
- 1250 MPa flexural strength
- 16 VITA shades, White & Bleach
- Unmatched strength and shade accuracy
- 5 Year Guarantee against fracture damage
ArgenZ™ HT+ Zirconia: Do you need to choose between strength and aesthetics?
ArgenZ™ HT+: Preparation Guide
EC Declaration Of Conformity: Quality and Regulatory Assurance
Please read before purchase: This is a custom made dental prosthetic device to be prescribed by a dentist for their patient. The fabrication process may require a wax set up for try-in stage to ensure perfect fit and aesthetic looks meet the requirement. Therefore, this product can only be purchased by GDC registered dentist or dental practice. Read more in the Store Policies tab below.
Login to see prices -
ArgenZ HT+ML Zirconia Milling Disc
ArgenZ HT+ MT Zirconia High Translucent Plus Multilayer Milling Disc.
- Suitable for full crowns and up to 14 unit full-arch
- 45% translucency
- 1250 MPa flexural strength
- 16 VITA shades, White & Bleach
- Unmatched strength and shade accuracy
- Aesthetic restoration anywhere in the mouth
Login to see prices -
ArgenZ HT+ML Zirconia Fitted Crown
ArgenZ™ HT+ MT Zirconia Stained Glazed and Fitted Crown. Made with High Tranclucency Plus Multilayer zirconia material, it offers high precision, blending technology, shade accuracy, 45% translucency and increased strength over other HT zirconia.
- From Scan or Impression
- Precisely CAD, milled and glazed, delivered ready to fitting in the patient’s mouth.
- Suitable for full crowns, inlays, onlays, veneers and up to 14 unit full-arch bridges
- 45% translucency
- 1250 MPa flexural strength
- Unmatched strength and shade accuracy
- Aesthetic restoration anywhere in the mouth
- 5 Year Guarantee against fracture damage
ArgenZ™ HT+ML Zirconia: Do you need to choose between strength and aesthetics?
EC Declaration Of Conformity: Quality and Regulatory Assurance
Please read before purchase: This is a custome made dental prosthetic device to be perscribed by a dentist for their patient. The fabrication process may require a wax set up for try-in stage to ensure perfect fit and esthetic looks meet the requirement. Therefore, this product can only be purchsed by GDC registered dentist or dental practice. Read more in the Store Policies tab below.
Login to see prices -
ArgenZ ST ML Zirconia Fitted Crown
ArgenZ ST ML Zirconia is a Super Translucent Multilayer Milled Zirconia Dental Crown for beautiful aesthetics most closely mimicking the natural dentin of the tooth. Precisely CAD, milled and glazed, ready to fit in the patient’s mouth.
- Dental Lab to Dental Chair Service in 7 Days
- From Scan or Impression
- Suitable for single & up-to 3 unit bridges anywhere in the mouth
- 50% translucency
- 850MPa flexural strength
- A stronger alternative to IPS e.max
- 16 VITA Classical and 3 Bleach shades
- 5 Year Guarantee against fracture damage
ArgenZ ST ML Zirconia is a great alternative to lithium disilicate offering the highest translucency with optimum strength featuring the natural dentin of the tooth. It can be used for up to three-unit bridges anywhere in the mouth, including pre-molars. ArgenZ™ material is manufactured in the USA, isostatically pressed and CE compliant.
ArgenZ™ ST ML Zirconia: Do you need to choose between strength and aesthetics?
EC Declaration Of Conformity: Quality and Regulatory Assurance
Safety Data Sheet: M00104_ArgenZ_Anterior_STML_Discs
Please read before purchase: This is a custome made dental prosthetic device to be perscribed by a dentist for their patient. The fabrication process may require a wax set up for try-in stage to ensure perfect fit and esthetic looks meet the requirement. Therefore, this product can only be purchsed by GDC registered dentist or dental practice. Read more in the Store Policies tab below.
Login to see prices
Oral care materials