3M Oral Care
-
IPS Ivocolor – Glaze Powder/Paste
IPS Ivocolor Glaze Paste is a thixotropic glaze paste for a high degree of gloss in only one firing cycle. The glaze is available with or without fluorescence and is compatible with all IPS ceramics.
Login to see prices -
Yeti Die Hardener with Brush 18ml
Completely absorbed by gypsum. Does not build up any dispersion layers.
– cure, seal and smooth the gypsum surface
– protects the plaster
– best results for the production of wax-copings
– stain and water repellent
Recommended also for inlays and partial bridges within the margin line area. For the remaining areas spacers have to be used.
Login to see prices -
Argen Digital Precious Metal Dental Crown Coping Inlay Onlay
- Crowns, inlays, onlays and bridges up to 6 units CAD designed
- Precisely CAD, milled and fitted on a 3D printed model, ready to fit in the patient’s mouth.
- Precious casting alloys (alloy prices quoted separately)
- Precious bonding alloys (alloy prices quoted separately)
- Wide range of precious alloys available
Login to see prices -
Dentivera Metal-Free Frame Complete Denture
Dentivera Metal-Free Frame Complete Denture. Milled from Dentivera™ milling discs, RPDs made from Ultaire™ AKP diminish the all-too-common pain points of metal for labs, dentists and patients alike. An excellent choice for RPDs with clasps as well as implant overdentures, including friction bars. It is biocompatible metal free frame completed with bonded PMMA acrylic and teeth.
Please read before you purchase: This is a custome made dental prosthetic device to be perscribed by a dentist for their patient. The fabrication process may require a wax set up for try-in stage to ensure perfect fit and esthetic looks meet the requirement. Therefore, this product can only be purchsed by GDC registered dentist or dental practice. Read more in the Store Policies tab below.
Login to see prices -
Ivoclar IPS eMax CAD Lithium Disilicate Dental Milling Block
Highly aesthetic IPS e.max CAD a lithium disilicate glass-ceramic blocks ideal for Veneers, inlays / onlays, partial crowns / full crowns.
- High-strength lithium disilicate glass-ceramic (LS2) featuring a flexural strength up to 530 MPa
- Excellent aesthetics and optional customisation
- MO, MT, LT and HT translucency levels
- Full VITA shades
Login to see prices -
ArgenZ HT+ML Zirconia Milling Disc
ArgenZ HT+ MT Zirconia High Translucent Plus Multilayer Milling Disc.
- Suitable for full crowns and up to 14 unit full-arch
- 45% translucency
- 1250 MPa flexural strength
- 16 VITA shades, White & Bleach
- Unmatched strength and shade accuracy
- Aesthetic restoration anywhere in the mouth
Login to see prices -
Yeti Dental DIP & BRUSH Zirkonliquid Shade A3
With K2 Dip & Brush it is possible to individualize parts of frameworks (Brush) or to colorize whole frameworks by dipping (Dip) before sinterisation.
It allows the reduction of zircon whiteness.
Water based A3 colour
100 ml volume
Login to see prices -
Yeti Dental DIP & BRUSH Zirkonliquid Shade B2
With K2 Dip & Brush it is possible to individualize parts of frameworks (Brush) or to colorize whole frameworks by dipping (Dip) before sinterisation.
It allows the reduction of zircon whiteness.
Water based B2 colour
100 ml volume
Login to see prices -
Virtual CAD bite Registration Silicon Material
Virtual CADbite registration material offers scannable properties suitable for the optical recording of data when fabricating restorations with CAD/CAM systems like CEREC. As an addition silicone, Virtual CADbite can also be applied in conventional bite registration techniques alongside indirect restorative procedures.This material is characterized by its non-slump consistency, rapid setting time, and notable dimensional stability. Additionally, it ensures excellent detail reproduction and reaches a final hardness of 32 Shore D.Login to see prices -
Dent Spa Case Ultrasonic Denture Cleaning Box
Denture box with ultrasonic vibrating action for removable appliance cleaning.
Insert 2 ‘AAA’ batteries (not included) into the battery compartment located underneath the unit.
Open the unit by pressing on the front clip inwards and upwards.
Lightly brush your dental appliance under running water.
Place your dental appliance/s into Dent-Spa and fill with lukewarm water just below just below the lip of the unit (never use boiling water)
Add 1 NitrAdine tablet (samples inc) press the on/off switch to activate. Unit will automatically switch off after 7 minutes. TABLETS NOT TO BE TAKEN ORALLY.
Leave dental appliance/s in Dent-Spa for at least 15 minutes when used with the NitrAdine tablets, then remove appliance/s and rinse under water before placing them back in the mouth.
For best results use NitrAdine tablets at least twice a week to leave your appliance fresh, clean and disinfected against harmful bacteria. If you have symptoms of dental thrush use tablets daily for two weeks to eliminate the bacteria build-up.
Empty Dent-Spa after use, wipe clean. DO NOT submerse or rinse under running water as this will damage the unit.Login to see prices -
3M 8822 FFP2 Valved Face Mask Pack of 10
FFP2 (Filtering Face Piece – Class 2) provides protection against medium level fine dusts and oil or water based mists, typically found during power sanding, grinding, drilling and cutting paints, varnish, cement, wood and steel.
3M™ Cool Flow™ Valve reduces heat build-up inside the respirator giving cooler and more comfortable wear.
Pack of 10
Login to see prices -
Milled CoCr Coping Frame
Sold per unit
- Milled or SLM Non-Precious CoCr for copings and frames.
- Manufactured from Argen 255 CoCr alloy
- Nickel free and beryllium-free alloy with a balance of properties designed to produce high quality metal restorations
- Designing digitally means less adjustments and an excellent fit, less cost and more savings.
Login to see prices -
eMax Lithium Disilicate Fitted Crown
Highly aesthetic IPS e.max CAD a lithium disilicate glass-ceramic ideal for Veneers, inlays / onlays, partial crowns / full crowns
- High-strength lithium disilicate glass-ceramic (LS2) featuring a flexural strength up to 530 MPa
- Excellent aesthetics and optional customisation
- MO, MT, LT and HT translucency levels
- Full VITA shades
- SEND IMPRESSIONS – download FREE post lable below
- OR SCAN – see instructions below:
Please read before purchase: This is a custome made dental prosthetic device to be perscribed by a dentist for their patient. The fabrication process may require a wax set up for try-in stage to ensure perfect fit and esthetic looks meet the requirement. Therefore, this product can only be purchsed by GDC registered dentist or dental practice. Read more in the Store Policies tab below.
Login to see prices -
ArgenZ HT+ Zirconia Fitted Crown Inlay Onlay
ArgenZ HT+ Zirconia (High Translucent-Plus) offers 45% more translucency and increased strength over other HT zirconia. Precisely CAD, milled and glazed, ready to fit in the patient’s mouth.
- Dental Lab to Dental Chair Service in 7 Days
- From Scan or Impression
- Suitable for full crowns and up to 14 unit full-arch, as well as veneers, inlays and onlays
- 45% translucency
- 1250 MPa flexural strength
- 16 VITA shades, White & Bleach
- Unmatched strength and shade accuracy
- 5 Year Guarantee against fracture damage
ArgenZ™ HT+ Zirconia: Do you need to choose between strength and aesthetics?
ArgenZ™ HT+: Preparation Guide
EC Declaration Of Conformity: Quality and Regulatory Assurance
Please read before purchase: This is a custom made dental prosthetic device to be prescribed by a dentist for their patient. The fabrication process may require a wax set up for try-in stage to ensure perfect fit and aesthetic looks meet the requirement. Therefore, this product can only be purchased by GDC registered dentist or dental practice. Read more in the Store Policies tab below.
Login to see prices -
Coltene Brilliant Crios Milled Composite Crown
Coltene BRILLIANT Crios is a reinforced, submicron hybrid composite. Highly aesthetic and easily polished. Brilliant Crios is available in 9 aesthetic shades and two translucencies, HT and LT. Shades A1, A2, A3, A3.5, B1, B2, B3, C2 and BL.
- Milled and Fitted
- For Crown/Inlay/Onlay/Veneer
- Permanent restoration
- Shades A1, A2, A3, A3.5, B1, B2, B3, C2 and BL
- Two translucencies, HT and LT
- Highly aesthetic for anterior and posterior restorations
- 250Mpa in flexual strenght
- Single units only
- Lab to chair service – 7 days
Login to see prices
Oral care materials